Vietnam Product Catalog

Explore our site to discover the innovative solutions you need, including cutting-edge scientific equipment, advanced semiconductors and electronics products, and more.

Filter

Filters
Search

Showing 49–72 of 102 results

  • ECD - Thermal Profiling-M.O.L.E. EV6

    ECD – Thermal Profiling-M.O.L.E. EV6

    Thermal profiling is the recording of time and temperature throughout a thermal process – most often to measure exposure within an oven. Used in many industries, thermal profiling collects data on a product’s thermal transformation experience,…

    Thermal profiling is the recording of time and temperature throughout a thermal process – most often to measure exposure within an oven. Used in many industries, thermal profiling collects data on a product’s thermal transformation experience, which is then analyzed to optimize complex process settings and conditions to ensure quality results.

  • EIT - LED Instruments

    EIT – LED Instruments

    The spectral output from an UV LED source is narrow or monochromatic when compared to broadband (mercury) source. Each of EIT 2.0 LLC’s L-Bands (L-365, L-385, L-395 and L-405) has an optic response and dynamic range optimized for LEDs. Our paten…

    The spectral output from an UV LED source is narrow or monochromatic when compared to broadband (mercury) source. Each of EIT 2.0 LLC’s L-Bands (L-365, L-385, L-395 and L-405) has an optic response and dynamic range optimized for LEDs. Our patented Total Measured Optic Response in which ALL optics in the instrument are included in the instrument response result in better performance and repeatability; unit-to-unit, run-to-run and source-to-source.

  • EIT - Online Monitoring

    EIT – Online Monitoring

    Online Monitoring allows users to continuously monitor and track a UV source. This is useful in applications where a radiometer will not fit, where high value and/or high production speeds are used and when it is not practical or easy to access ea…

    Online Monitoring allows users to continuously monitor and track a UV source. This is useful in applications where a radiometer will not fit, where high value and/or high production speeds are used and when it is not practical or easy to access each lamp (multi-lamp bank and/or elevated). The feedback is relative and looks at the relative output over time. Online Monitoring will identify both gradual (aging lamps) or sudden (equipment malfunction, user changed parameters) changes in the intensity.

  • EIT - UV Broadband Instruments

    EIT – UV Broadband Instruments

    Radiometers provided calibrated irradiance (W/cm2) and energy density values (J/cm2) in one to four bands. Profiling Radiometers also provide the irradiance profile (W/cm2 as a function of time) which is useful to …

    Radiometers provided calibrated irradiance (W/cm2) and energy density values (J/cm2) in one to four bands. Profiling Radiometers also provide the irradiance profile (W/cm2 as a function of time) which is useful to further understand the UV conditions and compare UV systems.

  • Essemtec - Dispensing

    Essemtec – Dispensing

    Equipped with the most modern, accurate systems that drive and steering technology offers today. Mediums rarely behave the same way, environmental conditions are significant for the behavior of liquid changes. This is why there is virtually no sta…

    Equipped with the most modern, accurate systems that drive and steering technology offers today. Mediums rarely behave the same way, environmental conditions are significant for the behavior of liquid changes. This is why there is virtually no standard application in dispensing. Specific solutions for each dispensing task depending on both environmental influences and the type of liquid have to be evaluated. Easy programming and operation allow for a wide range of dispensing applications.

  • GETECH - Automatic Router - GAR1200

    GETECH – Automatic Router – GAR1200

    The GAR1200 is an in-line router machine specially designed to route (depanelize) large panels with PCB size up to 350mm x 310mm into individual units. It is a fast, space-saving, and accurate machine designed for high volume production with minim…

    The GAR1200 is an in-line router machine specially designed to route (depanelize) large panels with PCB size up to 350mm x 310mm into individual units. It is a fast, space-saving, and accurate machine designed for high volume production with minimal operator participation. It has two worktables. While one of the worktables is in high-speed routing operation, the other worktable works with the robotic P&P module to unload boards and load the new PCB panel. This gives us 100% operational uptime without the issue of load/unload time. Using a high-resolution CCD camera and GAR user-friendly Windows-based software allows users to program the routing paths in minutes. There are also no limitations in the number of programs stored. GAR1200 uses high-quality components and a welded steel structure to ensure rigidity and high performance. All the axes and linear guides used are protected from dust and dirt to increase lifespan and performance.

  • GETECH - Fully Automatic Inline Router With Board Handling - The RBM

    GETECH – Fully Automatic Inline Router With Board Handling – The RBM

    The RBM is a sophisticated and versatile fully-automated dual station de-panelling system. It is fitted with an auto conveyor width adjustment feature and also has various other tools to optimise the routing process based on your workflow.

    The RBM is a sophisticated and versatile fully-automated dual station de-panelling system. It is fitted with an auto conveyor width adjustment feature and also has various other tools to optimise the routing process based on your workflow.

  • GETECH - GSR Series Semi-auto Router Machine

    GETECH – GSR Series Semi-auto Router Machine

    The GSR series standalone routers are designed to be high performance and cost-effective solutions to meet your PCB depaneling requirements. The system allows continuous routing without stoppages and has a user-friendly software that allows the us…

    The GSR series standalone routers are designed to be high performance and cost-effective solutions to meet your PCB depaneling requirements. The system allows continuous routing without stoppages and has a user-friendly software that allows the user to program the routing paths within minutes. Key components are protected from dust and dirt to increase machine performance and lifespan.

  • Heraeus - BlueLight® UV System Solutions

    Heraeus – BlueLight® UV System Solutions

    Our BlueLight® Flash System is our new solution offering >log 4 reduction at high speeds without using harmful chemicals or mercury based light sources, it has been specifically designed for food packaging disinfection of liquid an…

    Our BlueLight® Flash System is our new solution offering >log 4 reduction at high speeds without using harmful chemicals or mercury based light sources, it has been specifically designed for food packaging disinfection of liquid and viscous food including beverage bottle caps.

  • Heraeus - LightHammer® Series

    Heraeus – LightHammer® Series

    The LightHammer® series of smart UV curing systems is Heraeus Noblelight’s most advanced, incorporating solid-state power supplies and internal sensors to monitor real-time system performance. Solid-state power sup…

    The LightHammer® series of smart UV curing systems is Heraeus Noblelight’s most advanced, incorporating solid-state power supplies and internal sensors to monitor real-time system performance. Solid-state power supplies reduce energy costs and provide simple and flexible control schemes via software versus traditional hardware.

  • Heraeus - Microwave-Powered UV Curing Systems

    Heraeus – Microwave-Powered UV Curing Systems

    Heraeus Noblelight invented microwave-powered UV curing system

    Heraeus Noblelight invented microwave-powered UV curing system technology. Compared to arc lamp curing technology, it offers significant impr…

    Heraeus Noblelight invented microwave-powered UV curing system

    Heraeus Noblelight invented microwave-powered UV curing system technology. Compared to arc lamp curing technology, it offers significant improvements in production speeds, process consistency, operating lifetimes, and reduced heat onto the substrate. Heraeus Noblelight’s easy-to-service modular design provides process flexibility with lower cost of ownership.

    Microwave-Powered UV Curing Systems

    Our microwave-powered UV curing system products are available in a variety of power classes and with a choice of different UV broadband wavelength output bulbs to meet your industrial curing needs. These UV curing systems easily retrofit into existing production lines or can easily integrate into new production processes. Our newest systems are Industry 4.0 ready with imbedded sensors and microprocessors.

    Heraeus microwave-powered UV curing systems consist of three primary components

    1. Electrodeless bulb – long guaranteed service life of 6,000 to 8,000 hours, consistent output, available in various wavelengths so you can optimize the UV curing to your specific process needs.

    2. Lamp module – available in either 6-inch or 10-wide air-cooled modules, combined to span across any width process or position around three-dimensional parts, switch off individual modules not needed to reduce operating costs.

    3. Power supply – provides efficient operation and flexible control.

  • Heraeus - Semray - UV LED

    Heraeus – Semray – UV LED

    Our air- and water-cooled UV LED curing product portfolio offers different power classes and lamp head sizes to fit various industrial applications. To suit your process best, we have wavelengths from 365 nm to 405 nm available. Not only do we off…

    Our air- and water-cooled UV LED curing product portfolio offers different power classes and lamp head sizes to fit various industrial applications. To suit your process best, we have wavelengths from 365 nm to 405 nm available. Not only do we offer appropriate controlls and cooling systems, but also customized solutions to meet the customers unique needs.

  • Heraeus - UV Lamps

    Heraeus – UV Lamps

    Heraeus Noblelight offers a broad range of UV low-pressure lamps manufactured from high quality quartz glass for disinfecting water, air and surfaces.

    Heraeus Noblelight offers a broad range of UV low-pressure lamps manufactured from high quality quartz glass for disinfecting water, air and surfaces.

  • Heraeus - UV Systems

    Heraeus – UV Systems

    Heraeus Noblelight invented microwave-powered UV curing system technology. Compared to arc lamp curing technology, it offers significant improvements in production speeds, process consistency, operating lifetimes, and reduced heat onto the substra…

    Heraeus Noblelight invented microwave-powered UV curing system technology. Compared to arc lamp curing technology, it offers significant improvements in production speeds, process consistency, operating lifetimes, and reduced heat onto the substrate. Heraeus Noblelight’s easy-to-service modular design provides process flexibility with lower cost of ownership.

  • Hoya Corporation - EXECURE 4000-D

    Hoya Corporation – EXECURE 4000-D

    The Hoya EXECURE 4000-D is a premium UV filter designed to provide exceptional clarity and protection for your camera lens. Its advanced multi-coating technology minimizes reflection and flare while maintaining high light transm…

    The Hoya EXECURE 4000-D is a premium UV filter designed to provide exceptional clarity and protection for your camera lens. Its advanced multi-coating technology minimizes reflection and flare while maintaining high light transmission, resulting in sharp and vibrant images. With its scratch-resistant surface and water-repellent coating, the Hoya EXECURE 4000-D is the perfect choice for professional photographers and enthusiasts alike who demand the best performance from their equipment.

  • Hoya Corporation - UL750

    Hoya Corporation – UL750

    The Hoya UL750 is a high-performance UV filter that delivers unparalleled optical quality and protection for your camera lens. Its advanced coating technology minimizes reflections and glare while maintaining maximum light trans…

    The Hoya UL750 is a high-performance UV filter that delivers unparalleled optical quality and protection for your camera lens. Its advanced coating technology minimizes reflections and glare while maintaining maximum light transmission, resulting in sharp and vivid images. Built with a durable and scratch-resistant surface, the Hoya UL750 is the ideal choice for professional photographers and videographers who demand the best performance and reliability from their equipment.

  • Nordson EFD - 3-Axis EV Series Automated Fluid Dispensing Robot

    Nordson EFD – 3-Axis EV Series Automated Fluid Dispensing Robot

    The EV Series automated fluid dispensing system is a tabletop robot that offers easy automation for precise fluid applications, featuring proprietary dispensing software and a simple vision pencil camera.   The EV Series can function as a standal…

    The EV Series automated fluid dispensing system is a tabletop robot that offers easy automation for precise fluid applications, featuring proprietary dispensing software and a simple vision pencil camera.   The EV Series can function as a standalone system or as a key component in an automated solution. It integrates easily into in-line transfer systems, rotary tables, and pallet assembly lines.  

    • Precision Fluid Dispensing:

    Uses EFD syringe barrel and valve systems with vision-guided DispenseMotion™ software and a pencil camera for easy setup and programming.

    • Advanced Motion Control:

    True three-dimensional motion control for dots, lines, circles, arcs, and compound arcs.

    • Versatile Platforms:

    Platform sizes from 150 x 200 mm to 570 x 500 mm, suitable for batching and critical dispensing applications.

  • Nordson EFD - HPx High-Pressure Dispensing Tool

    Nordson EFD – HPx High-Pressure Dispensing Tool

    HPx High-Pressure Dispensing Tool easily apply precise amounts of thick assembly fluids like epoxies and medical-grade adhesives through dispense tips as small as 0.004” with Nordson EFD HPx™ dispensing tools. Featuring a unique design, HPx to…

    HPx High-Pressure Dispensing Tool easily apply precise amounts of thick assembly fluids like epoxies and medical-grade adhesives through dispense tips as small as 0.004” with Nordson EFD HPx™ dispensing tools. Featuring a unique design, HPx tools increase the pressure inside disposable syringe barrels up to seven times. Designed to work with Nordson EFD air-powered dispensers, they produce a maximum dispensing pressure of 700 psi. Increase yields and produce better quality parts in less time, while minimizing the risk of repetitive stress injuries.

  • Nordson Electronics Solutions - Asymtek Forte® Series

    Nordson Electronics Solutions – Asymtek Forte® Series

    Next-generation and time-tested capabilities are combined in this upgraded system to increase productivity by up to 50% over the top-selling Spectrum® ll, all in a space-saving footprint. Improve UPH with swift acceleration, enhanced motion contr…

    Next-generation and time-tested capabilities are combined in this upgraded system to increase productivity by up to 50% over the top-selling Spectrum® ll, all in a space-saving footprint. Improve UPH with swift acceleration, enhanced motion control, and IntelliJet® compatible Forte MAX dual-valve dispensing.

  • Nordson Electronics Solutions - Automated Plasma Treatment System - FlexTRAK® SHS

    Nordson Electronics Solutions – Automated Plasma Treatment System – FlexTRAK® SHS

    Built upon Nordson Electronics Solutions’ patented plasma technology, the FlexTRAK®-SHS is our latest fully automated plasma system incorporating a high-capacity F3-S chamber, to provide high uniformity and increased productivity. The chamb…

    Built upon Nordson Electronics Solutions’ patented plasma technology, the FlexTRAK®-SHS is our latest fully automated plasma system incorporating a high-capacity F3-S chamber, to provide high uniformity and increased productivity. The chamber architecture remains the same as the smaller FlexTRAK platform, providing a seamless transition between chambers as production demands more capacity.

  • Nordson Electronics Solutions - Plasma Polymerization Deposition System - PD Series

    Nordson Electronics Solutions – Plasma Polymerization Deposition System – PD Series

    Nordson Electronics Solutions introduces its PD Series Plasma Deposition Systems family, which uses plasma polymerization to deposit thin films uniformly during precision manufacturing and assembly processes to change the surfac…

    Nordson Electronics Solutions introduces its PD Series Plasma Deposition Systems family, which uses plasma polymerization to deposit thin films uniformly during precision manufacturing and assembly processes to change the surface characteristics of a substrate. Plasma deposition can be used for applications in a wide range of industries, including medical, life sciences, industrial, semiconductor, MEMS, plastics, and electronics.

    The PD Series for plasma deposition uses a gas vapor or heated liquid monomer vapor delivery system to deposit coatings that can reduce, and in certain cases eliminate, tackiness, provide a tie layer, make surfaces more slippery or resistant to corrosion, act as a drug enhancement or inhibition agent in life sciences applications, and change desired surfaces from hydrophobic to hydrophilic or vice versa. Polymers can be directly attached to a desired surface while the chains are growing, which reduces the steps necessary for other coating processes such as grafting. This is very useful for pinhole-free coatings of 100 picometers to 1 micrometer thickness with solvent insoluble polymers.

  • Nordson Electronics Solutions - Plasma Systems - Sphere Series

    Nordson Electronics Solutions – Plasma Systems – Sphere Series

    SPHERE series systems support automated handling and processing of round or square wafer/substrate sizes ranging from 75mm to 300mm. In addition, thin wafer processing with or without carriers is possible, depending upon wafer t…

    SPHERE series systems support automated handling and processing of round or square wafer/substrate sizes ranging from 75mm to 300mm. In addition, thin wafer processing with or without carriers is possible, depending upon wafer thickness.

    The patented plasma chamber design provides exceptional etch uniformity and process repeatability. Primary plasma applications include a variety of etching, ashing, and descum steps. Other plasma processes include contamination removal, surface roughening, increasing wettability, and enhancing bonding and adhesion strength, photoresist/polymer stripping, dielectric etch, wafer bumping, organic contamination removal, and wafer destress.

    • Wafer Cleaning – The SPHERE series plasma systems remove contamination prior to wafer bumping, remove organic contamination, remove fluorine and other halogen contamination, and remove metal and metal oxides. Plasma also improves spun-on film adhesion and cleans metallic bond pads.
    • Wafer Etching – Plasma systems descum wafer of residual photoresist and BCB, pattern dielectric layers for redistribution, strip/etch photoresist, enhance adhesion of wafer applied materials, remove excess wafer applied mold /epoxy, enhance adhesion of gold solder bumps, destress wafer to reduce breakage, improve spun-on film adhesion, and clean aluminum bond pads.
  • Nordson Electronics Solutions - Vacuum Plasma Treatment Systems - AP Series

    Nordson Electronics Solutions – Vacuum Plasma Treatment Systems – AP Series

    The AP Series consists of four batch plasma treatment systems offering small, mid-size and large vacuum chamber options that deliver process correlation, controller continuity and reliable, reproducible vacuum gas plasma treatment to customers as …

    The AP Series consists of four batch plasma treatment systems offering small, mid-size and large vacuum chamber options that deliver process correlation, controller continuity and reliable, reproducible vacuum gas plasma treatment to customers as they expand from an R&D environment to various levels of production.

  • Nutek - Bare Board Loader With Pass Through Mode – Standard Series

    Nutek – Bare Board Loader With Pass Through Mode – Standard Series

    Bare Board Loader With Pass Through Mode is used for loading of bare PCBs to the production line.

    Bare Board Loader With Pass Through Mode is used for loading of bare PCBs to the production line.