Vietnam Product Catalog

Explore our site to discover the innovative solutions you need, including cutting-edge scientific equipment, advanced semiconductors and electronics products, and more.

Filter

Filters
Search

Showing 25–48 of 102 results

  • AMADA - Linear DC Welding Controls - UB Series

    AMADA – Linear DC Welding Controls – UB Series

    Transistor direct current power supplies (also called “Linear DC”) produce much the same results as the high frequency inverter by using a high number of power transistors as the direct energy source. This technology provides clean, square wav…

    Transistor direct current power supplies (also called “Linear DC”) produce much the same results as the high frequency inverter by using a high number of power transistors as the direct energy source. This technology provides clean, square wave forms with extremely fast rise time. Used primarily in constant voltage feedback control, transistor DC power supplies are effective in thin foils and fine wire welding applications and for extremely short welds.

    The UB-4000A Linear DC welding control is ideal for applications which require exceptional control, fast rise times, and high quality throughput. UB-4000A requires only single phase input power and can output up to 4000 amps. Ultra-fast rise times permit short overall weld times, resulting in less part deformation and stronger welds. This is extremely important when welding heat sensitive parts such as battery cells or sensitive electronic devices.

    UB-500A (5-500 amps), and UB-1500A (15- 1500 amps) are Linear DC controls with feedback modes designed to adapt to part and process variables. These power supplies should be used for smaller applications where closed-loop feedback control and fast response times are required. Safety critical applications such as those found in the medical and automotive markets will benefit from UB-500A’s precision low energy control.

  • AMADA - MM-400A Desktop Resistance Weld Monitor

    AMADA – MM-400A Desktop Resistance Weld Monitor

    Measures Current, Force, Voltage, Time and displacement

    MM-400A welding monitor enables operators to monitor and manage key welding variables that result in changes in weld heat such as current, voltage, time, force and dis…

    Measures Current, Force, Voltage, Time and displacement

    MM-400A welding monitor enables operators to monitor and manage key welding variables that result in changes in weld heat such as current, voltage, time, force and displacement. The compact unit supports a wide range of resistance welding technologies including AC, DC inverter, AC inverter, transistor and capacitive discharge. It features a simple and intuitive user interface and color touch panel display.

  • AMADA - Pneumatic Active Welding System - OP-AWS3

    AMADA – Pneumatic Active Welding System – OP-AWS3

    Active Welding System 3 Pneumatic

    Formerly known as AWS3.The OP-AWS3 Active Welding System combines pneumatic weld heads / weld pincers (F- and FP-series) with an inverter power supply (ISQ-series) all in…

    Active Welding System 3 Pneumatic

    Formerly known as AWS3.The OP-AWS3 Active Welding System combines pneumatic weld heads / weld pincers (F- and FP-series) with an inverter power supply (ISQ-series) all in one unique system. Its various interfaces make OP-AWS3 an easy to integrate system for automation. The complete system is an integrated solution providing process control, monitoring and quality analysis all in one.

    OP-AWS3 is a fully integrated resistance spot welding solution providing process control, monitoring and quality analysis all in one. The system features an MFP motorized weld head or pincer head and an ISQ high frequency inverter power supply.

    OP-AWS3 may be used alone as a benchtop system or easily integrates into an existing production line.

  • AMADA - Transistor Welding Power Supplies

    AMADA – Transistor Welding Power Supplies

    Fast rise time
    AMADA Transistor-controlled welding power supplies have rise times 4.5 times faster than that of …

    Fast rise time
    AMADA Transistor-controlled welding power supplies have rise times 4.5 times faster than that of conventional* models. high quality welding can be accomplished in a short period of time on small work pieces.
    * Compared with conventional model MD-1500E

    No welding transformer needed
    The welding current is directly controlled with fast switching by transistor, so no welding transformer is required.

    Built-in pre-check function
    Applying current on the workpiece before the main current, it is possible to judge whether or not there is a workpiece set on the electrodes, and to evaluate the status of workpiece.

    Polarity switchable type
    This can eliminate the Peltier effect (polarity effect) and provide uniform nugget diameters on series welding.

    Two-channel type
    Two weld heads can be controlled by one power supply. It contributes to cost and space savings.

  • AMADA - Welding Accessories

    AMADA – Welding Accessories

    A successful resistance spot welding process generally requires a welding power supply, a spot welding head, and a weld monitor or weld checker. Selecting the right accessories for these critical components can enhance and improve your results, an…

    A successful resistance spot welding process generally requires a welding power supply, a spot welding head, and a weld monitor or weld checker. Selecting the right accessories for these critical components can enhance and improve your results, and provide additional safety for your operators.

  • AMADA - WR Series Resistance Welding Workstations

    AMADA – WR Series Resistance Welding Workstations

    Combining a power supply, weld head, process monitor and workbench, the all-new WR Resistance Welding Workstations are designed to simplify welding tasks and maximize quality and reliability, while enhancing operator safety.

    …

    Combining a power supply, weld head, process monitor and workbench, the all-new WR Resistance Welding Workstations are designed to simplify welding tasks and maximize quality and reliability, while enhancing operator safety.

    Key Features:

    • DC inverter technology with up to 60,000 A provided on the secondary
    • “Cascade” feature to enable the use of one power supply with several workstations
    • Integration with either an AMADA WELD TECH MH-1501 or KN-200A weld head
    • Optional weld monitor
    • Anti-tie-down buttons for safe operation
    • Adjustable electrode speed
  • ATV - Diamond Scriber RV-129

    ATV – Diamond Scriber RV-129

    This reliable Diamond Scriber performs fast, easy and precise scribing and cutting of silicon wafers, as well as thin and thick film ceramic and glass substraits. It forms the grooves necessary for effective glass or ceramic cutting: shallow, even…

    This reliable Diamond Scriber performs fast, easy and precise scribing and cutting of silicon wafers, as well as thin and thick film ceramic and glass substraits. It forms the grooves necessary for effective glass or ceramic cutting: shallow, even and continuous. All essential operating parameters – the angle of the scribing tool, the scribing force, the touchdown point and the lift up point of the tool are precisely adjustable to ensure optimal felxibility and repeatable results.

    Key Features

    • Fast and easy operation
    • No maintenance
    • Multipurpose diamond tool with 4 cutting edges
    • Adjustable scribing force
    • Adjustable substrate thickness
    • Precise step and repeat by adjustable
    • Mechanical stop with angular adjustmen
    • Roller blade for glass (option)
  • ATV - SRO 714 TCB

    ATV – SRO 714 TCB

    ATV’s successful SRO-71X series IR vacuum reflow oven is the heart of ATV’s reflow soldering principle. Our ATV-TCB, Thermal Compression Bonding is also based on which this system is developed. The Single Cold Wall Process C…

    ATV’s successful SRO-71X series IR vacuum reflow oven is the heart of ATV’s reflow soldering principle. Our ATV-TCB, Thermal Compression Bonding is also based on which this system is developed. The Single Cold Wall Process Chamber approach is a standard on itself and is also applied for the ATV-TCB which fulfills all your process requirements.

    Our Thermal Compression Bonding system has an isostatic press in combination with an elastomer membrane. This patented technology gives you the opportunity to use a maximum pressing force of 0,5MPa over 150 mm Ø. This pressure can be gradually built up to the desired process pressure under which you want to perform your process. With our applied membrane technology you will not be faced with product shifting from start to finish. Another advantage for our technology is that you may process simultaneously products which have a different topography. This will have no influence on the expected final process results.

    Also in this tool ATV uses all its know-how of the cold wall technology in combination with the IR heating concept, vacuum assembly as well as formic acid atmosphere to achieve the prefect solder joints you need for a reliable product. Working with the ATV-TCB you will notice that programming is easy and with the 100 step programming steps you will be able to fine tune your process in such a way that a process success is guaranteed.

    Key Features

    • Viewing Window
    • Membrane Assembly  ≤ 5 bar Gas Pressure
    • Safety Alarms
    • Formic Acid Supply Assembly Two Gas Supply Connections
  • ATV - SRO i-Line

    ATV – SRO i-Line

    The all-new and groundbreaking SRO i-Line is a high volume production tool used for vacuum reflow soldering. Implementing this tool within the ATV single chamber approach will help to fulfil all your current and future …

    The all-new and groundbreaking SRO i-Line is a high volume production tool used for vacuum reflow soldering. Implementing this tool within the ATV single chamber approach will help to fulfil all your current and future demands. Since 1982 ATV‘s single chamber approach has proven equally successful in the R&D and pilot line production market.

    With more than 550 devices in use worldwide ATV is ready to step into high volume production with its brand-new SRO i-Line. This system can easily be upgraded from the basic one process chamber version to three process chambers all within the same footprint. Each chamber is individually programmable to perform its own process. This allows for the most flexible solution within your production.

    Key Features:

    • High Throughput
    • Short Cycle Times
    • Formic Acid
    • Process Temperature Up To 450°c Temperature Ramp-up Rate 3k/sec.
    • Temperature Cool-down Rate 2k/sec.
    • Excellent Temperature Uniformity
    • IR Heating
    • Small Footprint (No Footprint Change Up To 3 Process Chambers)
  • ATV - SRO-700

    ATV – SRO-700

    This table top soldering system is the ideal tool for R&D applications. With its rapid thermal annealing and brazing capabilities the SRO-700 is equally suited for your basic reflow soldering applications as well as all your…

    This table top soldering system is the ideal tool for R&D applications. With its rapid thermal annealing and brazing capabilities the SRO-700 is equally suited for your basic reflow soldering applications as well as all your R&D assignments. A cold wall chamber principle in combination with the IR lamp heating technology and the vacuum option will reward you with all the required process repeatability and perfect void free solder joints.

    With its 100 mm clearance over the heated surface the system can handle products like IGBT and power electronics packages. The SRO-700 is an incredibly versatile reflow oven for semiconductor and MEMS application. Whatever the objective the SRO-700 is ready to handle it all.

    Key Features

    • Formic Acid Enriched Atmosphere
    • Direct IR Heating
    • Multiple TC monitoring
    • Process temperature 450°C
    • Oxygen < 1,0ppm with PURIFIED N2
    • 100 steps/RECIPE program
  • ATV - SRO-706 Getter

    ATV – SRO-706 Getter

    ATV’s approach using the Cold Wall Process Chamber is also applied in the SRO-706 Getter system. This system can be applied for Thermal Getter processes in R&D and Production line applications. The basis for the Getter sys…

    ATV’s approach using the Cold Wall Process Chamber is also applied in the SRO-706 Getter system. This system can be applied for Thermal Getter processes in R&D and Production line applications. The basis for the Getter system is the successful SRO-706 series IR vacuum reflow oven. Common applications are sealing of packages with kovar caps or optical windows for gyroscopes, microbolometer and various MEMS sensors under high vacuum by applying thermal Getter activation.

    With its proven direct IR heating approach, ATV applies for the SRO-706 Getter system a top and bottom heating. The IR lamp arrays are independently monitored and controlled as 2 separate heating zones. This results that there is an excellent heating uniformity under vacuum when reaching a maximum temperature of 450°C during the Thermal getter process. The sensor or chip temperature remains below 100°C during the getter activation process. Optionally, a mass spectrometer can be added for residual gas analysis during the sealing process.

    The SRO-706 Getter is a result of in-depth cooperation with our customer base and listing to the needs of the market as you may expect form ATV.

    Key Features

    • Programmable solder reflow oven
    • Thermal reactor
    • High vacuum package lid sealing system
    • Thermal getter activation
  • ATV - SRO-716

    ATV – SRO-716

    The ATV SRO-716 series standalone IR vacuum reflow ovens are the benchmark for R&D, low volume pilot line and medium volume batch production. The system produces high quality results with outstanding process stability and re…

    The ATV SRO-716 series standalone IR vacuum reflow ovens are the benchmark for R&D, low volume pilot line and medium volume batch production. The system produces high quality results with outstanding process stability and repeatability. Configuration dependent, process capabilities include: flux-less soldering, eutectic die attach, gold tin soldering, void-free soldering, hermetic lid sealing, formic acid processing and flip chip soldering etc.

    Key Features:

    • Small Footprint, Freestanding Vacuum Reflow Oven
    • Touch TCs with Quick Swap Hotplates
    • Maximum Temperature 450°C, (optional 700°C)
    • Temperature ramp-up rate 3.5K/sec
    • Up to 100 process steps per profile recipe
    • Automatic Chamber Opening / Closing
    • Optional Top Heating
    • Heated Area: 314 x 314 mm
    • Oxygen < 1 ppm
    • Optional High-Pressure Atmosphere: up to 3 bar (abs)
    • Formic Acid, H2 or Solder Paste Activation
  • Cool Clean - Omega™ 4000 Integrated CO2 Spray Cleaning Module

    Cool Clean – Omega™ 4000 Integrated CO2 Spray Cleaning Module

    The Omega™ 4000 CO2 cleaning module provides powerful dry ice cleaning and surface preparation. The CO2 integrated spray is capable of quickly removing thin film, dust, and other surface contamination without damaging the p…

    The Omega™ 4000 CO2 cleaning module provides powerful dry ice cleaning and surface preparation. The CO2 integrated spray is capable of quickly removing thin film, dust, and other surface contamination without damaging the part.

    Uniquely designed, this compact cleaning unit comes in a stainless steel or powdercoated white frame. Test results have proven surfaces are prepared as good or better with the Omega™ 4000 than using etchants and dangerous solvents.

    An optional, powerful combination of atmospheric plasma technology and integrated CO2 spray can be used to further break the bonds of tough organics. A final pass with CO2 spray removes the remaining debris, leaving a clean and high energy surface for bonding, coating, encapsulation, or under-fill processes.

  • Cool Clean - Omega™ 5000/7000 – MobileClean™ Cleaning System

    Cool Clean – Omega™ 5000/7000 – MobileClean™ Cleaning System

    MobileClean™ brings precision cleaning exactly where it’s needed. CO2 integrated spray cleaning is powerful yet selective. Apply it only where needed to jet away oils, films and particulate matter.

    MobileClean™ brings precision cleaning exactly where it’s needed. CO2 integrated spray cleaning is powerful yet selective. Apply it only where needed to jet away oils, films and particulate matter.

    Our patented technology allows the operator to dial in the hardness and impact velocity of the  CO2 spray particles for aggressive or mild cleaning action.

    MobileClean™ is equipped with a convenient spray wand and optional on-board HEPA filtered vacuum. Simply roll up the MobileClean™, plug it in and clean.

  • Cool Clean - Omega™ 8000 Integrated CO2 Spray Cleaning Module

    Cool Clean – Omega™ 8000 Integrated CO2 Spray Cleaning Module

    The Omega™ 8000 CO2 cleaning module is designed to operate 4 independent channels of CO2 spray. By converting liquid CO2 into solid CO2 particles that are ejected out of the noz…

    The Omega™ 8000 CO2 cleaning module is designed to operate 4 independent channels of CO2 spray. By converting liquid CO2 into solid CO2 particles that are ejected out of the nozzle, it is possible to clean a wide variety of substrates. The CO2 spray is combined with heated air propellant to form a non-condensing spray, leaving behind no residue after cleaning.

    The Omega™ 8000 is configured with the SmartSpray™ process, which automatically adjusts the integrated spray, using pressure and temperature control, to maintain optimum user defined spray conditions. After being fully integrated, products don’t have to be removed, cleaned and returned to the production line, resulting in reduced human interaction, higher throughput and decreased cost-of-ownership.

  • ECD - Continuous Monitoring - OvenSENTINEL™

    ECD – Continuous Monitoring – OvenSENTINEL™

    OvenSENTINEL™, the latest continuous monitoring solution from ECD, sets the new standard in reflow process monitoring and product traceability. OvenSENTINEL leapfrogs competitor product to deliver unmatched measurement and vis…

    OvenSENTINEL™, the latest continuous monitoring solution from ECD, sets the new standard in reflow process monitoring and product traceability. OvenSENTINEL leapfrogs competitor product to deliver unmatched measurement and visibility – down to the board and profile specification level – isolating and analyzing potentially damaging process variations. Completely customizable with user-specified dashboards, expanded sensor inputs, and flexible data extractions. OvenSENTINEL allows detailed and actionable reflow process oversight.

  • ECD - Dry Storasge

    ECD – Dry Storasge

    SmartDRY™ desiccant dry cabinet, for the storage of surface-mount technology (SMT) components with a Moisture Sensitive Level (MSL), intelligently maintains a low relative humidity (RH) as required by the IPC standard J-STD-03…

    SmartDRY™ desiccant dry cabinet, for the storage of surface-mount technology (SMT) components with a Moisture Sensitive Level (MSL), intelligently maintains a low relative humidity (RH) as required by the IPC standard J-STD-033 while preventing electrostatic discharge (ESD) using durable electrically conductive powder paint surfaces over steel construction.

    Fully network-capable with mobile connectivity and total accessibility from any networked device, ECD’s SmartDRY™ Intelligent Dry Storage technology enables compatibility with smart factory, Industry 4.0 operations.

  • ECD - Machine Quality Management

    ECD – Machine Quality Management

    Machine Quality Management (MQM) tools ensure soldering equipment – whether reflow, wave, or selective – is performing to specifications. Keeping a machine operating within its set tolerances sets a good foundation for product quality and high…

    Machine Quality Management (MQM) tools ensure soldering equipment – whether reflow, wave, or selective – is performing to specifications. Keeping a machine operating within its set tolerances sets a good foundation for product quality and high-yield operations. ECD MQM pallets use the M.O.L.E. thermal profiler as the data collection device, enabling the use of one data acquisition system that can be used across soldering equipment platforms.

  • ECD - Thermal Profiling

    ECD – Thermal Profiling

    Thermal profiling is the recording of time and temperature throughout a thermal process – most often to measure exposure within an oven. Used in many industries, thermal profiling collects data on a product’s thermal transfo…

    Thermal profiling is the recording of time and temperature throughout a thermal process – most often to measure exposure within an oven. Used in many industries, thermal profiling collects data on a product’s thermal transformation experience, which is then analyzed to optimize complex process settings and conditions to ensure quality results.

    A pioneer in the design of the traveling thermal profiler, ECD has developed a suite of thermal data logging products that serve the electronics, baking, industrial and solar industries, among others.

  • ECD - Thermal Profiling - M.O.L.E. EV6

    ECD – Thermal Profiling – M.O.L.E. EV6

    With a revolutionary new design, M.O.L.E.™ EV6 brings deep data collection and touch screen convenience to thermal profiling. The traveling thermal profiler allows configuration, measurement and data analysis right on the devi…

    With a revolutionary new design, M.O.L.E.™ EV6 brings deep data collection and touch screen convenience to thermal profiling. The traveling thermal profiler allows configuration, measurement and data analysis right on the device – providing immediate actionable information, saving time and reducing the requirement for intensive operator training.

    Using a familiar smartphone-like capacitive touch screen, users now have shop floor data literally at their fingertips. The six-channel M.O.L.E. EV6 integrates with all ECD RIDER™ machine quality management technologies for a truly scalable approach, made easier with visual, touch screen control.

  • ECD - Thermal Profiling - MEGAM.O.L.E.™ 20

    ECD – Thermal Profiling – MEGAM.O.L.E.™ 20

    Do you demand the highest density of thermocouple placement possible on your Hi-Reliability, High-Value PCB? ECD’s got your Spec! Do you expect a software package that flexes with your workflow, providing customizable data ext…

    Do you demand the highest density of thermocouple placement possible on your Hi-Reliability, High-Value PCB? ECD’s got your Spec! Do you expect a software package that flexes with your workflow, providing customizable data extractions, Imports of your .MDM M.O.L.E. libraries and compatibility with your intranet, Excel, and all ECD M.O.L.E.™ Profilers?

    MEGAM.O.L.E.™ 20 delivers your specifications in a sleek 7.2mm thin package with patented productivity enhancing features that will give you the edge in R&D decision making to WOW. Management, Customers and your OEM-EMS QA linkage.

  • Placeholder

    ECD – Thermal Profiling – V-M.O.L.E Series

    The V-M.O.L.E.™ is a full-featured compact thermal profiler that belies its sophistication in an easy-to-use 3-channel Mini-thermocouple configuration.

    The V-M.O.L.E.™ is a full-featured compact thermal profiler that belies its sophistication in an easy-to-use 3-channel Mini-thermocouple configuration.

  • Placeholder

    ECD – Thermal Profiling – V-M.O.L.E.™ Series

    The V-M.O.L.E.™ is a full-featured compact thermal profiler that belies its sophistication in an easy-to-use 3-channel Mini-thermocouple configuration.

    The V-M.O.L.E.™ is a full-featured compact thermal profiler that belies its sophistication in an easy-to-use 3-channel Mini-thermocouple configuration.

  • ECD - Thermal Profiling - V-M.O.L.E.™ Series

    ECD – Thermal Profiling – V-M.O.L.E.™ Series

    The V-M.O.L.E.™ is a full-featured compact thermal profiler that belies its sophistication in an easy-to-use 3-channel Mini-thermocouple configuration. Ideal for VERIFICATION of PCB profile performance, 3 channels give you Hot…

    The V-M.O.L.E.™ is a full-featured compact thermal profiler that belies its sophistication in an easy-to-use 3-channel Mini-thermocouple configuration. Ideal for VERIFICATION of PCB profile performance, 3 channels give you Hot, Cold and Sensitive component data for verifying the correct oven settings.

    V-M.O.L.E. also boasts the same powerful MAP software created for the MEGAM.O.L.E.™ 20 thermal profiler, including the Target-10 feature, and of course, the patented “OK-Button” The world’s only one-touch Go/No-Go indicator of profile compliance to pre-programmed specifications.