Ortoalresa – Centrifuge – High Capacity  

  • VIETNAM

    DKSH Technology Co.,Ltd
    Head office: 16th Floor, Peakview Tower Building, 36 Hoang Cau Street, O Cho Dua Ward, Dong Da District, Hanoi City.

    Ho Chi Minh Branch: 5th Floor, Viettel Complex Building, 285 Cach Mang Thang Tam, Ward 12, District 10, Ho Chi Minh City.

    Da Nang Branch: 14th Floor, VietinBank Building, 36 Tran Quoc Toan, Hai Chau District, Da Nang city.

    +84 28 3812 5806 Ext 89604

    Email

The type of control provided, through its TFT colour touch screen, provides the user with features that enable, in addition to the control of the equipment by operating parameters, the possibility to export the data for subsequent analysis and future operation programming.

Available Models

A great centrifuge, compact, high capacity and with the advantages of equipment in superior segments. The type of control provided, through its TFT colour touch screen, provides the user with features that enable, in addition to the control of the equipment by operating parameters, the possibility to export the data for subsequent analysis and future operation programming. The autonomy provided by this equipment enables the user to optimise working time in the lab, by automation of cycles and modes of operation. These features also ensure process traceability and that no parameter is uncontrolled.

The same as the rest of Ortoalresa centrifuges, it is designed to be versatile, therefore it has swing out rotors with volumes of 400 ml. per bucket, rotors for microplates 80 mm height, angle fixed rotors for high speed and microtubes as well as a wide range of adaptors for all of them.

Key Features

TFT color touch screen, visible from more than 3 m.

  • Shows RPM and RCF, time, acceleration/deceleration values (PCBS) and unbalancing location system (ULS).
  • Speed programming in 10 RPM/10 xg steps.
  • Real RCF values on screen based onaccessories configuration.
  • Count up/down from “0” or at “set RPM/RCF” fortest reproducibility.
  • Timer countdown/up from “0” or at “set RPM/RCF” for reproducible tests.
  • Timer from 1 sec. to 99 hours programmable in 1sec. steps and hold position.
  • PCBS: Progressive controlled acceleration andbraking system up to 175 selectable ramps that prevents sample homogenization after separation.
  • ULS: Unbalance location system indicating on the screen the number of the bucket which produces the unbalance switch off.
  • Start delay: To program the time at which the cycle is to begin.
  • Linked program: Permits the linking of up to 8 consecutive programmes without the need of user intervention.
  • 40 programmable memories, with protection under password.
  • Several acoustic and visual messages showing the user the situation of the device.

User friendliness

  • Microprocessor controlled. PC connection.
  • Induction motor maintenance free (brushless).
  • Rotors and adapters list in memory.
  • Noise level: below 60 dB.
  • Start, stop, open lid and short spin with adjustablespeed buttons.
  • Option of free/locked adjustment of RPM/ RCFalong the run.
  • Automatic lid opening, programmable.
  • Low heigh for easy access
  • Last values remain in memory.
  • Automatic rotor recognition. Over-speedprotection.

Safety

  • Lid provided with security systems:
    –  Automatic lid lock system, motorizedwith double lock.
    –  Emergency lid-lock release.
    –  Locking and protection against openingalong the run.
    –  Lid dropping protection.
    –  Port in the lid for calibration and operation checking.
  • Ergonomic design that allows close the lid effortless
  • Unbalance detection and switch off.
  • Protection safety ring between thecentrifugation chamber and the housing.
  • Chamber of centrifugation in stainless steel(easy cleaning).
  • Rotors can be removed with the lid closed.Hermetic lids.
  • Rotors and adapters autoclavable, easy toinstall by the user.
  • Forced ventilation to reduce temperatureincreasing.
  • Automatic disconnection for energy saving upto 8 h., with deactivation option.

Standards and Directives

  • EU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
  • Standards: EN 61010-1,EN 61010-2-101, EN 61010- 2-020, EN 61326-2-6,EN 61326-1.

A great refrigerated centrifuge, compact, high capacity and with the advantages of equipment in superior segments. Its TFT colour touch screen provides the user with features that enable, in addition to the control of the equipment by operating parameters, the possibility to export the data for subsequent analysis and programming for future operations. As the rest of Ortoalresa centrifuges, it’s designed to be versatile, therefore it has swing out rotors with volumes of 400 ml. per bucket, rotors for microplates of 80 mm height, angle fixed rotors for high speed and microtubes as well as a wide range of adaptors for all of them.

The autonomy that this equipment gives to the user optimises the laboratory routine by the personalization of the work cycles. These particularities also ensure process traceability, and that no parameter is uncontrolled. Its refrigeration system allows it to maintain the minimum temperature of the chamber below 4°C regardless of the type of rotor and the speed selected.

Key Features

TFT color touch screen, visible from more than 3 m.

  • Shows RPM and RCF, time, temperature, acceleration/deceleration values (PCBS) andunbalance location system (ULS).
  • Speed programming in 10 RPM/10 xg steps.
  • Real RCF values on screen based onaccessories configuration.
  • Count up/down from “0” or at “set RPM/RCF” fortest reproducibility.
  • Timer countdown/up from “0” or at “set RPM/RCF” for reproducible tests.
  • Timer from 1 sec. to 99 hours programmable in 1 sec. steps and hold position.
  • PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.
  • ULS: Unbalance location system indicating on the screen the number of the bucket which produces the unbalance switch off.
  • Start delay: To program the time at which the cycle is to begin.
  • Linked program: Permits the linking of up to 8 consecutive programmes without the need of user intervention
  • 40 programmable memories, with protection under password.
  • Several acoustic and visual messages showing the user the situation of the device.

User friendliness 

  • Microprocessor controlled. PC connection.
  • Induction motor maintenance free (brushless).
  • Rotors and adapters list in memory.
  • Noise level: below 60 dB.
  • Start, stop, open lid and short spin with adjustablespeed buttons.
  • Option of free/locked adjustment of RPM/ RCFalong the run.
  • Low heigh for easy access
  • Last values remain in memory.
  • Automatic rotor recognition. Over-speedprotection.

Safety

  • Lid provided with security systems:
    –  Automatic lid lock system, motorizedwith double lock.
    –  Emergency lid-lock release.
    –  Locking and protection against openingalong the run.
    –  Lid dropping protection.
    –  Port in the lid for calibration andoperation checking.
  • Ergonomic design that allows close the lideffortless.
  • Unbalance detection and switch off.
  • Protection safety ring between thecentrifugation chamber and the housing.
  • Chamber of centrifugation in stainless steel(easy cleaning).
  • Rotors can be removed with the lid closed.
  • Rotors and adapters autoclavable, easy toinstall by the user.
  • Automatic disconnection for energy saving upto 8 h.

Cooling

  • Maintains the refrigeration after the centrifugation process.
  • Precooling program with rotor spinning and temperature selectable.
  • Guarantees 4 °C at maximum RPM.
  • Temperature range from -20°C (-4°F) to 40°C (104°F) in 1°C/1°F steps. Programmable in °C o °F.
  • Temperature sensor inside the chamber. Gas R 449A HFO (CFC free).

Standards and Directives

  • EU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
  • Regulation n°: (EC) 1005/2009, (EU) 517/2014. 
  • Standards: EN 61010-1, EN 61010-2-101,EN 61010- 2-020, EN 61326-2-6, EN 61326-1.

Benchtop centrifuge with large capacity and high perShapence. With a wide range of accessories to process tubes from 750 ml. to 0,2 ml. in more than 12 rotors, both angle fixed and swing out. It has more than 50 different sets of adaptors, giving it great versatility. This equipment is the culmination of the merger of high capacity and high speed equipment, resulting in a routine use centrifuge with specific characteristics of superior level models. Its colour TFT touch screen offers perShapence that permits, in addition to controlling the equipment by operational parameters, the possibility of exporting data for analysis and timer programmed operation.

The autonomy provided by this equipment enables the user to optimise working time in the lab, by automation of cycles and modes of operation. These features also ensure process traceability and that no parameter is uncontrolled.

Key Features

TFT color touch screen, visible from more than 3 m.

  • Shows RPM and RCF, time, acceleration/deceleration values (PCBS) and unbalance location system (ULS).
  • Speed programming in 10 RPM/10 xg steps.
  • Real RCF values on screen based onaccessories configuration.
  • Count up/down from “0” or at “set RPM/RCF” fortest reproducibility.
  • Timer countdown/up from “0” or at “set RPM/RCF” for reproducible tests.
  • Timer from 1 sec. to 99 hours programmable in 1sec. steps and hold position.
  • PCBS: Progressive controlled acceleration andbraking system up to 175 selectable ramps that prevents sample homogenization after separation.
  • ULS: Unbalance location system indicating on the screen the number of the bucket which produces the unbalance switch off.
  • Start delay: To program the time at which the cycle is to begin.
  • Linked program: Permits the linking of up to 8 consecutive programmes without the need of user intervention.
  • 40 programmable memories, with protection under password.
  • Several acoustic and visual messages showing the user the situation of the device.

User friendliness 

  • Microprocessor controlled. PC connection.
  • Induction motor maintenance free (brushless).
  • Rotors and adapters list in memory.
  • Noise level: below 60 dB.
  • Start, stop, open lid and short spin with adjustablespeed buttons.
  • Option of free/locked adjustment of RPM/ RCFalong the run.
  • Automatic lid opening, programmable.
  • Low height for easy access.
  • Last values remain in memory.
  • Automatic rotor recognition. Over-speedprotection.

Safety

  • Lid provided with security systems:
    –  Automatic lid lock system, motorizedwith double lock.
    –  Emergency lid-lock release.
    –  Locking and protection against openingalong the run.
    –  Lid dropping protection.
    –  Port in the lid for calibration andoperation checking.
  • Ergonomic design that allows close the lideffortless.
  • Unbalance detection and switch off.
  • Protection safety ring between thecentrifugation chamber and the housing.
  • Chamber of centrifugation in stainless steel(easy cleaning).
  • Rotors can be removed with the lid closed.Hermetic lids.
  • Rotors and adapters autoclavable, easy toinstall by the user.
  • Forced ventilation to reduce temperatureincreasing.
  • Automatic disconnection for energy saving upto 8 h., with deactivation option.

Standards and Directives

  • EU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
  • Standards: EN 61010-1, EN 61010-2-101, EN 61010- 2-020, EN 61326-2-6,EN 61326-1.

The largest of our refrigerated benchtop centrifuges that offers the maximum perShapence. With an ergonomic design that enables easy loading of the rotor, as well as traceability of the position of the samples for easy identification of the charge balance. It has a wide range of accessories that offer capacity for tubes of 750 ml., microplates, microtubes and a great number of positions for the more common use tubes of 15 ml. conical, 50 ml. conical, 15 ml., 10 ml., and 5 ml.

Its colour TFT touch screen offers perShapence that enables, in addition to controlling the equipment by operational parameters, the possibility of exporting data for analysis and timer programmed operation. The autonomy that this equipment gives to the user reduces the work time, by the automatization of the cycles and work modes, ensuring the process traceability. It has a refrigeration system that enables it to maintain the minimum temperature of the chamber below 4°C regardless of the type of rotor and the speed selected.

Key Features

TFT color touch screen, visible from more than 3 m.

  • Shows RPM and RCF, time, temperature, acceleration/deceleration values (PCBS) and unbalance location system (ULS).
  • Speed programming in 10 RPM/10 xg steps.
  • Real RCF values on screen based in accessoriesconfiguration.
  • Count up/down from “0” or at “set RPM/RCF” fortest reproducibility.
  • Timer countdown/up from “0” or at “set RPM/RCF” for reproducible tests.
  • Timer from 1 sec. to 99 hours programmable in 1sec. steps and hold position.
  • PCBS: Progressive controlled acceleration andbraking system up to 175 selectable ramps that prevents sample homogenization after separation.
  • ULS: Unbalance location system indicating on the screen the number of the bucket which produces the unbalance switch off.
  • Start delay: To program the time at which the cycle is to begin.
  • Linked program: Permits the linking of up to 8 consecutive programmes without the need of user intervention.
  • 100 programmable memories, with protection under password.
  • Several acoustic and visual messages showing the device situation to the user.

User friendliness 

  • Microprocessor controlled. PC connection.
  • Induction motor maintenance free (brushless).
  • Rotors and adapters list in memory.
  • Noise level: below 60 dB.
  • Start, stop, open lid and short spin with adjustable speed buttons.
  • Option of free/locked adjustment of RPM/ RCF along the run.
  • Low height for easy access.
  • Last values remain in memory.
  • Automatic rotor recognition. Over-speedprotection.

Safety

  • Lid provided with security systems:
    –  Automatic lid lock system, motorizedwith double lock.
    –  Emergency lid-lock release.
    –  Locking and protection against openingalong the run.
    –  Lid dropping protection.
    –  Port in the lid for calibration andoperation checking.
  • Ergonomic design that allows close the lideffortless.
  • Unbalance detection and switch off.
  • Protection safety ring between thecentrifugation chamber and the housing.
  • Chamber of centrifugation in stainless steel(easy cleaning).
  • Rotors can be removed with the lid closed.Hermetic lids.
  • Rotors and adapters autoclavable, easy toinstall by the user.
  • Automatic disconnection for energy saving upto 8 h.

Cooling

  • Maintains the refrigeration after the centrifugation process.
  • Precooling program with rotor spinning and selectable temperature.
  • Guarantees 4 °C at maximum RPM.
  • Temperature range from -20°C (-4°F) to 40°C (104°F) in 1°C/1°F steps. Programmable in °Co °F.
  • Temperature sensor inside the chamber.
  • Gas R 449A HFO (CFC free).

Standards and Directives

  • EU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
  • Regulation n°: (EC) 1005/2009, (EU) 517/2014. 
  • Standards: EN 61010-1, EN 61010-2-101, EN 61010- 2-020, EN 61326-2-6,EN 61326-1.

The largest of our benchtop machines, with a capacity of up to 4 litres and an ergonomic design that enables easy loading of the rotor, as well as traceability of the positioning of the samples so as to balance the load and for easy identification. It has a wide range of accessories with capacity for four 1.000 ml. bottles, microplates, microtubes and a large number of positions for the most commonly used 15 ml. conical, 50 ml. conical, 15 ml., 10 ml. and 5 ml. tubes for clinical as well as biotechnology applications.

Its colour TFT touch screen offers performance that enables, in addition to controlling the equipment by operational parameters, the possibility of exporting data for analysis and timer programmed operation. The autonomy provided by this equipment facilitates the automation of work cycles and modes. This also ensures traceability of the process, not leaving any parameter uncontrolled and maintaining the process at all times.

It has a refrigeration system that enables it to maintain the minimum temperature of the chamber below 4°C regardless of the type of rotor and the speed selected.

Key Features

TFT color touch screen, visible from more than 3 m.

  • Shows RPM and RCF, time, temperature, acceleration/deceleration values (PCBS) and unbalance location system (ULS).
  • Speed programming in 10 RPM/10 xg steps.
  • Real RCF values on screen based in accessoriesconfiguration.
  • Count up/down from “0” or at “set RPM/RCF” fortest reproducibility.
  • Timer countdown/up from “0” or at “set RPM/RCF” for reproducible tests.
  • Timer from 1 sec to 99 hours programmable in 1sec. steps and hold position.
  • PCBS: Progressive controlled acceleration andbraking system up to 175 selectable ramps that prevents sample homogenization after separation.
  • ULS: Unbalance location system indicating on the screen the number of thebucket which produces the unbalance switch off.
  • Start delay: To program the time at which the cycle is to begin.
  • Linked program: Permits the linking of up to 8 consecutive programmes without the need of user intervention.
  • 40 programmable memories, with protection under password.
  • Several acoustic and visual messages showing the user the situation of the device.

User friendliness 

  • Microprocessor controlled. PC connection.
  • Induction motor maintenance free (brushless).
  • Rotors and adapters list in memory.
  • Noise level: below 60 dB.
  • Start, stop, open lid and short spin with adjustablespeed buttons.
  • Option of free/locked adjustment of RPM/ RCFalong the run.
  • Low heigh for easy access.
  • Last values remain in memory.
  • Automatic rotor recognition. Over-speed protection.

Safety

  • Lid provided with security systems:
    –  Automatic lid lock system, motorizedwith double lock.
    –  Emergency lid-lock release.
    –  Locking and protection against openingalong the run.
    –  Lid dropping protection.
    –  Port in the lid for calibration andoperation checking.
  • Ergonomic design that allow close the lid effortless.
  • Unbalance detection and switch off.
  • Protection safety ring between thecentrifugation chamber and the housing.
  • Chamber of centrifugation in stainless steel(easy cleaning).
  • Rotors can be removed with the lid closed.Hermetic lids.
  • Rotors and adapters autoclavable, easy toinstall by the user.
  • Automatic disconnection for energy saving upto 8 h.

Cooling

  • Maintains the refrigeration after the centrifugation process.
  • Precooling program with rotor spinning and selectable temperature.
  • Guarantees 4 °C at maximum RPM.
  • Temperature range from -20°C (-4°F) to 40°C (104°F) in 1°C/1°F steps. Programmable in °Co °F.
  • Temperature sensor inside the chamber.
  • Gas R 449A HFO (CFC free).

Standards and Directives

  • EU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
  • Regulation n°: (EC) 1005/2009, (EU) 517/2014. 
  • Standards: EN 61010-1, EN 61010-2-101, EN 61010- 2-020, EN 61326-2-6,EN 61326-1.

Brand

Ortoalresa

Ortoalresa has a wide range of centrifuges for all applications. Users are from a very wide range of laboratories, from the most elementary, for hospital applications and clinical analysis labs, to microbiology departments, research centres, quality control labs for drinks, food and different production processes, etc.

test block for Laos

Your download – just a few steps away

Please enter your details here:

test

Contact us

Contact us